PIPETITE® Anchors
For a clean, recess-free surface
What are Pipetite Anchors?
Specifically designed for mounting Pipetite Standard, Flat and ReBoot, Pipetite Anchors are drive-style fasteners that feature a clean, recess-free surface. They are self-sufficient and don’t require any additional bonding agents.
These drive-style fasteners are hammered into place, leaving a smooth recess-free surface that won’t collect dirt and grime.
Two styles of Pipetite Anchors are available – one for concrete and brick surfaces, and the second for panel walls and thin wall structures.
Concrete & Brick Anchor
This one-piece anchor features a fluted surface that provides the needed retention.
To install, drill a 4mm hole into the surface, and hammer the anchor into place.
Panel & Thin Wall Anchor
This anchor comes in two pieces and is perfect for panel walls, thin wall structures and concrete or brick surfaces. This design allows for an even compressed Pipetite seal and prevents accidental deformation of the stainless steel ring due to excessive force.
To install, drill a 6mm hole into the surface and place the plastic insert in the hole. Position the Pipetite in place and hammer the anchor into the insert. The plastic insert will expand in the hole and firmly anchor the Pipetite in place. The shoulders of the anchor sit flat to the head of the plastic insert.
Features:
- Offers clean, crevice free finish to installed Pipetite
- Stainless steel construction
- Special thread pattern to ensure positive retention in any concrete, brick or hard surface
- 4mm drill size
- 100 anchors per box
Industries:
- Processed foods
- High-acid foods
- Dairy
- Beverages
- Breweries
- Home & personal care
- Pharmaceutical
- Biotech
- Chemical
Concrete & Brick Anchor
This one-piece anchor features a fluted surface that provides the needed retention. To install, drill a 4mm hole into the surface, and hammer the anchor into place.
Panel & Thin Wall Anchor
This anchor comes in two pieces and is perfect for panel walls, thin wall structures and concrete or brick surfaces. This design allows for an even compressed Pipetite seal and prevents accidental deformation of the stainless steel ring due to excessive force. To install, drill a 6mm hole into the surface and place the plastic insert in the hole. Position the Pipetite in place and hammer the anchor into the insert. The plastic insert will expand in the hole and firmly anchor the Pipetite in place. The shoulders of the anchor sit flat to the head of the plastic insert.
PreviousModels
| Pipetite Anchors | ||
| Model | Type | Quantity per Box |
| PT317127 | Concrete and Brick | 100 |
| PT317150 | Panel and Thin Walls | 100 |
