| Safety Air Nozzles | |||
| Model | Inlet | Material | |
| BPHP1002 | 1/4 BSP Female | Brass | |
| BPHP1002SS | 1/4 BSP Female | Type 303 Stainless Steel | |
Model HP1002 and HP1002SS High Power Safety Air Nozzle
The High Power Safety Air Nozzle provides strong blowing force for applications requiring high thrust and velocity. It uses more compressed air than other air nozzles but is low when compared to typical blowoffs delivering the same force. Meets OSHA maximum dead ended pressure and noise requirements.
Performance
| Â | Air Consumption | Force* | Sound Level | ||
| Model | SCFM | SLPM | Lbs | Grams | dBA |
| HP1002 | 32 | 906 | 1.8 | 816 | 87 |
| HP1002SS | 32 | 906 | 1.8 | 816 | 87 |
* Force measured at 12″ (305mm) from target. Sound level measured at 36″ (914mm).
All measurements taken at 80 PSIG (5.5 BAR).
Airflow Pattern & Dimensions
Models
Accessories
Swivel Fittings, Stay Set Hoses & More
EXAIR Swivel Fittings make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement can help optimise performance and improve efficiency. Add Flexible Stay Set Hoses and Magnetic Bases for applications where frequent repositioning of the Air Nozzles or Jets is required.
Learn MoreFilters, Regulators, Valves & More
With proper filtration of dirt, moisture and oil from the compressed air supply, EXAIR compressed air products will operate for years with no maintenance required. Use a 5 micron or smaller filter separator on the compressed air supply. To prevent problems associated with oil, use a 0.03 micron or smaller oil removal filter on the compressed air supply. Pressure regulators permit easy selection of the operating pressure, providing infinite control of flow, force and air consumption.
Learn More
Previous
