| 1″ Flat Super Air Nozzles | |||
| Model | Inlet | Material | |
| BP1126 | 1/8 BSP Female | Zinc Aluminium Alloy | |
| BP1126SS | 1/8 BSP Female | Type 316 Stainless Steel | |
| 1136SS | N/A | Shim Set – includes .005″ (0.13mm), .010″ (0.25mm) and .020″ (0.51mm) thick type 316 stainless steel shims | |
Model 1126 and 1126SS 1” Flat Super Air Nozzle
EXAIR’s 1″ (25mm) Flat Super Air Nozzle is a highly efficient, unique flat air nozzle. The patented* design uses a special shim to maintain the critical position of the component parts. A precise amount of air is released through the thin slot, across a flat surface. The result is a wide, forceful stream of high velocity, laminar airflow with minimal air consumption and noise.
Flat air nozzles by other manufacturers use a series of holes that consume enormous amounts of compressed air, are loud and can be dangerous.
The airflow of the 1″ Flat Super Air Nozzle cannot be blocked and meets OSHA standards 29 CFR – 1910.95(a) and 1910.242(b).
†Patent #5402938
Performance
| Air Consumption | Force* | Sound Level | |||
| Model | SCFM | SLPM | Ozs | Grams | dBA |
| 1126 | 10.5 | 297 | 9.8 | 278 | 75 |
| 1126SS | 10.5 | 297 | 9.8 | 278 | 75 |
* Force measured at 12″ (305mm) from target. Sound level measured at 36″ (914mm).
All measurements taken at 80 PSIG (5.5 BAR).
.015″ (0.38mm) shim installed
Advantages
- Forceful, laminar airstream
- Patented shim design for changing the airflow
- Extremely quiet
- Low air consumption
- Meets WorkSafe and OSHA noise level requirements
- Meets OSHA pressure requirements
- Available in zinc aluminium or type 316 stainless steel
Airflow Pattern
Dimensions
Models
Accessories
Swivel Fittings, Stay Set Hoses & More
EXAIR Swivel Fittings make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement can help optimise performance and improve efficiency. Add Flexible Stay Set Hoses and Magnetic Bases for applications where frequent repositioning of the Air Nozzles or Jets is required.
Learn MoreFilters, Regulators, Valves & More
With proper filtration of dirt, moisture and oil from the compressed air supply, EXAIR compressed air products will operate for years with no maintenance required. Use a 5 micron or smaller filter separator on the compressed air supply. To prevent problems associated with oil, use a 0.03 micron or smaller oil removal filter on the compressed air supply. Pressure regulators permit easy selection of the operating pressure, providing infinite control of flow, force and air consumption.
Learn More
Previous
