SaveAir®
In-line preset energy-saving miniature regulator for air and oxygen
What Is The SaveAir?
The SaveAir® regulator is an independent diaphragm regulator that can be installed in every compressed air system. It supplies a constant, exact outlet pressure regardless of the input pressure. The pressure is factory set and cannot be changed.
SaveAir® prevents dynamic pressure waste. This arises when the pressure and flow at the withdrawal point are unnecessarily higher than those specified by the manufacturer to achieve the desired function. Dynamic pressure waste is extremely costly, a waste of energy that may be found throughout the industry.
Save Air® ensures that a constant pressure is always maintained, despite the normal pressure fluctuations in a system.
Watch the Video
Applications
- Piping and compressed air systems
- Compressed air used in automation for actuation
- Control, feeding or transportation
- Pick and place units in automatic assembly systems
- Pump, flow stabilisation
- Pneumatic supply lines
- Pneumatic power tools
- Automotive
- Workshop equipment
- General pneumatic applications
Advantages
- Factory preset pressure
- Supplies tools exclusively with the specified pressure
- No pressure gauge needed
- Prevents compressed air waste
- Saves energy – reduces costs
- Highly reliable
- Locked to prevent pressure change – tamperproof
- Lightweight – small and compact size
- Increases tool service life
Installation Examples
PreviousTechnical Data – Version AIR
Max. inlet pressure:
Tolerance*:
Connection:
Flow:
Working temperature:
Material
Body:
Diaphragm:
Weight:
18 BAR
1 BAR – 3 BAR: +/- 0.3 BAR
4 BAR – 8 BAR: +/- 10%
1/4″ BSP female-female
See table below
0°C to 60°C
Zinc
NBR
ca. 80g
Technical Data – Version OXYGEN
Max. inlet pressure:
Tolerance*:
Connection:
Working temperature:
Material
Body:
Diaphragm:
Weight:
18 BAR
1 BAR – 3 BAR: +/- 0.3 BAR
4 BAR – 7 BAR: +/- 10%
1/4″ BSP female-female
0°C to 60°C
Brass nickel plated
FPM
ca. 125g
NPT threads available upon request.
*Test medium:
Air, Pe = 6 BAR/90 PSIG (at Pa <= 4 BAR/60 PSIG), 10Nl/min / 0.35 SCFM
Air, Pe = 10 BAR/150 PSIG (at Pa >= 4 BAR/60 PSIG), 10Nl/min / 0.35 SCFM
Models
| SaveAir Inline Pre-Set Regulator – BSP Female x Female | |||||
| Model | Thread | Outlet Pressure BAR PSIG |
Flow Rate SLPM SCFM |
||
| 231A0210 | 1/4″ | 1.0 | 15 | 400 | 14.2 |
| 231A0215 | 1/4″ | 1.5 | 23 | 400 | 14.2 |
| 231A0220 | 1/4″ | 2.0 | 30 | 600 | 21.3 |
| 231A0225 | 1/4″ | 2.5 | 36 | 600 | 21.3 |
| 231A0230 | 1/4″ | 3.0 | 45 | 700 | 24.7 |
| 231A0235 | 1/4″ | 3.5 | 50 | 700 | 24.7 |
| 231A0240 | 1/4″ | 4.0 | 60 | 700 | 24.7 |
| 231A0245 | 1/4″ | 4.5 | 65 | 700 | 24.7 |
| 231A0250 | 1/4″ | 5.0 | 75 | 700 | 24.7 |
| 231A0255 | 1/4″ | 5.5 | 80 | 700 | 24.7 |
| 231A0260 | 1/4″ | 6.0 | 90 | 800 | 28.3 |
| 231A0265 | 1/4″ | 6.5 | 95 | 800 | 28.3 |
| 231A0270 | 1/4″ | 7.0 | 100 | 800 | 28.3 |
| 231A0280 | 1/4″ | 8.0 | 120 | 800 | 28.3 |
| SaveAir Inline Pre-Set Regulator – NPT Female x Female | |||||
| Model | Thread | Outlet Pressure BAR PSIG |
Flow Rate SLPM SCFM |
||
| 231AS1215 | 1/4″ | 1.0 | 15 | 400 | 14.2 |
| 231AS1223 | 1/4″ | 1.5 | 23 | 400 | 14.2 |
| 231AS1230 | 1/4″ | 2.0 | 30 | 600 | 21.3 |
| 231AS1235 | 1/4″ | 2.5 | 36 | 600 | 21.3 |
| 231AS1245 | 1/4″ | 3.0 | 45 | 700 | 24.7 |
| 231AS1250 | 1/4″ | 3.5 | 50 | 700 | 24.7 |
| 231AS1260 | 1/4″ | 4.0 | 60 | 700 | 24.7 |
| 231AS1265 | 1/4″ | 4.5 | 65 | 700 | 24.7 |
| 231AS1275 | 1/4″ | 5.0 | 75 | 700 | 24.7 |
| 231AS1280 | 1/4″ | 5.5 | 80 | 700 | 24.7 |
| 231AS1290 | 1/4″ | 6.0 | 90 | 800 | 28.3 |
| 231AS1295 | 1/4″ | 6.5 | 95 | 800 | 28.3 |
| 231AS12100 | 1/4″ | 7.0 | 100 | 800 | 28.3 |
| 231AS12120 | 1/4″ | 8.0 | 120 | 800 | 28.3 |
